Power cable trays are installed outside and often windy rainforests. They are easy to dirty and do not clean for a long time. They are easy to damage the structure inside the power cable tray and reduce the life. Then, the cleaning of the power cable tray is very important. How is the power cable bridge cleaned?
    Cleaning of power cable trays is often cleaned and cleaned. Surfaces and other things contaminated with oil can be cleaned with ordinary household cleaners. Do not use corrosive solvents, or use decontamination powder and wire cleaning to avoid scratches and aesthetic effects. If the stain is difficult to remove, it can be cleaned with gasoline, kerosene, diesel, toluene, xylene, styrene, acetone, etc., but it needs to be washed immediately with water after cleaning to prevent intrusion into the internal structure.
    Cleaning of power cable trays When cleaning bridges, use bamboo chips or plastic sheets with a hardness lower than that of FRP. You can also use a tool spatula. This is to prevent the tool from scraping during cleaning. Injury the surface of the bridge. When washing, soft materials such as jersey, gauze, soft towels and soft foam can be used. FRP bridges should remove salt frost in time, and ships sailing in the sea should promptly remove salt crystals (salt cream) attached to the surface of the ship. Since the salt crystal has a focusing effect of a convex lens in sunlight, the surface FRP cable bridge accelerates aging under the action of high temperature. With the progress of society, the power supply is of great significance to human life. To ensure the stable transmission of power, in addition to the strict requirements of cable materials, cable trays can provide all-round protection for cables. Whether in the machine room, basement, or industrial and safety-critical locations, the use of the bridge can be seen. The power cable tray acts as a support for the cable and the cable is used as long as the project requires laying the cable. The importance of the bridge in the cable industry cannot be replaced. In addition to the function of transporting the wires, it also has the function of power transmission, which can effectively ensure the normal circulation of current. Be sure to protect the outside of the power cable tray and place it aging.